These charming roses from a fabric easy to do yourself! A master class will help you with this. In order to make flowers out of tissue, will need: a beautiful fabric, twigs or wooden skewers, hot glue.
1.Podbiraem beautiful fabric, plain or with a small figure. Cut into strips of width 12 cm and length of about 1 meter.
2. Fold the fabric in half lengthwise, to iron, to get the hand.
3. Firmware resulting arrow on the sewing machine.
4. Again, fold in half, draw and cut a wavy edge.
5. One end of the rectangular leave - in order to secure the bud on the branch.
6. Decorate with wave machine stitching.
7. to tie a square knot on the end of a branch or wooden stick, masking tip anchoring hot glue.
8. Now you need a little is gathered cloth, gently pull the thread from the seam in the middle.
9. Begin to form a bud, wrapping the cloth around twigs. Do not forget to fix each layer of hot glue.
10. Here is a rosette made of cloth should we get.
11. Make as many roses as you need. Decorate a bouquet to your liking. That's how easy it is to make an original gift with their own hands, decorate the house for the holiday, and just add comfort, summer and sunny mood!
source: artappetite
Workshop tested on my own experience) Take the book you are unlikely to read, and turns it into an original shelf! We also need some simple tools: Furniture Area, stationery knife and glue.
1. Take a hardcover book, a middle puts a corner. Pencil mark the width of the corner and then - its length. Pages books fix each other with screws (pre-drilled holes at the corners of an ordinary screwdriver or a drill with a drill 1.5-2mm).
2. The bracket is fastened to the wall with dowel-nails (2 pre-drilled holes). In the book, stationery sharp knife to cut a hole for the angle (half-sheet of the book).
3. "Dress" a book on the area, try on, if everything is in order - to the corner of superglue glue or fasten with screws.
4. Once the glue is dry, glue tight cover of the book (it is possible to fix the broad stationery clips). All! Shelf ready.
source:artappetite
With the help of an ordinary glass jars wooden shelf can be turned into a multipurpose shelf organizer. By the way, this is a good way to organize your workspace for those who loves to sew and do needlework. Not bad this shelf would look in the garage.
To realize the idea of need: wooden shelf - the basis of the banks with metal caps, screws, screwdriver.
1. The idea is simple to a disgrace! Screwed metal cover to the bottom of the shelf with screws. You can beat gvrzdyami but screws - more reliable.
2. Jars fill all sorts of useful content and fasten.
3. Original shelf organizer is ready!
My blog is for the following phrases
source: artappetite
If you want fresh ideas? They have me! Masterclass Week - an unusual textile cover books with pen and bookmark. Very convenient, especially if you like to take a book in the road or a walk. And the term "klatchbuk" came up with my husband when we tried to give capacious definition of this creation. In my opinion, very well :)
How to make:
To make klatchbuk, needed materials: cotton fabric with a beautiful print, tapes, adhesive padding polyester. I did cover a specific book (size 20.5 * 13.5 * 2.5 cm - the standard size is not very thick book).
1. cut out 2 handle 6 * 22 cm, body panel 24 * 33 cm, 2 side panels 24 * 12 cm, the inner piece 24 * 20 cm Given the size of your book may be slightly adjusted.. Glues synthetic padding duplicate body panel and handles.
2. Longitudinal sections were already duplicated synthetic padding handles press them into the folded parts in half.
Sew, paving the line close to the edge, it is possible for the symmetry on both sides.
3. Neaten and tuck the sides of the parts 24 * 20 (on both sides) and components 24 * 12 (with one hand).
4. Now for the fun: all of the details you need to properly assemble "sandwich". So, for the main part to be pinned symmetrical handles:
The side panels pinned inside out. Do not forget about the braid-tab (it should be on the left).
We close our "sandwich" piece 24 * 20 cm in the center, also face inward. Sew around the perimeter of all the parts together (be careful, do not sew the bottom of the tab!). After that, cut the edge at a distance of 4-5 mm from the seam and easily wrenched the cover through the side holes.
5. Try on the cover:
The final stage - stitch all around the perimeter of the cover, departing quite a bit from the edge.
That's it! You can enjoy to use them)
P.S. Soon came another clutch beech, also with cucumbers:
source: artappetite
I have previously published a master class on sewing clutch beech - original cover for a book with practical handles. I offer another performance option (call it "Apple Season").
This elegant cover, I sewed a present even before the New Year, and that it came to the turn :) Cover sewn on the same principle as the previous ones, but for the front side, I picked up the two types of tissue cheerful colors. Get the "bag" embellished cotton lace green color and the apple of thin felt (by drawing on the fabric).
Also it provides a convenient tab of the braid in tone lace:
You can even come up with a clutch beech in the style of patchwork and quilting, the idea is interesting and allows many variations.
Good luck to you creative!
source: artappetite
Today decided on the restoration of an old cover for a mobile phone. I enjoyed it for a long time, but unfortunately my dog one day, when I carelessly tossed on a chair, take a moment and completely otgryzla all the beads, and in some places, and broke the base. I thought to dismantle it for parts, but somehow his hands were raised.
And today decided on the restoration. My friend says:
- It is better to do and regret than not to do and regret.
And at the same time show the manufacturing process.
Job one needle. (By the way, when I did, I performed without needles one scaffold wonders. And how patience enough ?!)
Fix the fishing line a bead.
Gaining 6 beads for flower.
To form the ring, insert the needle in the first bead.
Next, the bottom two beads base (we the St-green), and again make a loop, again two beads, etc.
We are making the chain a little longer than your phone.
To proceed with the formation of the second row: the bottom two beads bases, do a loop, another 2 beads and bead join the 4 loops of the first row.
Next, insert the bead - the middle of a flower, the scheme below.
The diagram drawn in yellow beads of the first row of loops, purple beads painted base. The arrows show the progress of accession. When join the beads 4, bottom center pink bead, join 1biserinke, again in central and 4 bead. Central beads attached, the bottom two again beads foundations, etc.
Again, the bottom two beads base loop, two beads basis ... and join the third-fourth bead loops of the first row (the second loop turn down the other side).
Next to the fifth, then 7. Lacing to the second row is very responsible! Be careful: the accession goes through the loop, the loop of even turn down the other side.
We reach the end.
To move to the third row of beads recruit four bases. (In even-numbered rows - two beads to go in nechetnyh- 4). Make a loop ... and two beads framework and join the beads 4 loops previous series.
When the "canvas" is ready, then the bottom line: two beads, join with one hand, insert the center. Again join two beads on the other hand ... The bottom cover where the edge of the two beads of the base. The compound also.
Chain and cap made Lacing in the crosshairs.
And I made a bracelet.
And this is one of my cheholchik.
source: stranamasterov
