Workshop tested on my own experience) Take the book you are unlikely to read, and turns it into an original shelf! We also need some simple tools: Furniture Area, stationery knife and glue.
1. Take a hardcover book, a middle puts a corner. Pencil mark the width of the corner and then - its length. Pages books fix each other with screws (pre-drilled holes at the corners of an ordinary screwdriver or a drill with a drill 1.5-2mm).
2. The bracket is fastened to the wall with dowel-nails (2 pre-drilled holes). In the book, stationery sharp knife to cut a hole for the angle (half-sheet of the book).
3. "Dress" a book on the area, try on, if everything is in order - to the corner of superglue glue or fasten with screws.
4. Once the glue is dry, glue tight cover of the book (it is possible to fix the broad stationery clips). All! Shelf ready.
source:artappetite
1. Take a hardcover book, a middle puts a corner. Pencil mark the width of the corner and then - its length. Pages books fix each other with screws (pre-drilled holes at the corners of an ordinary screwdriver or a drill with a drill 1.5-2mm).
2. The bracket is fastened to the wall with dowel-nails (2 pre-drilled holes). In the book, stationery sharp knife to cut a hole for the angle (half-sheet of the book).
3. "Dress" a book on the area, try on, if everything is in order - to the corner of superglue glue or fasten with screws.
4. Once the glue is dry, glue tight cover of the book (it is possible to fix the broad stationery clips). All! Shelf ready.
source:artappetite
No comments:
Write comments