Decoration in Plate

It took:

plate (optional glass)
printing pictures,
acrylic lacquer glossy,
Acrylic paint (blue, red, yellow, white, black, silver)
PVA glue,
acrylic putty,
the cloth,
Silver ink in the cartridge (you can use a simple paint).

Skeet cleaned of labels (if any) and degrease by washing dish detergent, wiped dry.
Printout covered with two layers of acrylic varnish (varnish if not already pasted thinned printing, it can not go vspuchilis and beautiful waves).

After drying lacquer carved circle shaped plates. Stick to the plate using PVA glue.

Cut a piece of fabric the desired shape and well lubricated it in PVA glue (you can even leave it for 5 minutes to a well-soaked).

Fabric put in place, forming a fold in the right places, wetting glue needed. Cleaned with a cotton pad soaked in water glue residue from the printout. Left to dry (about 6.8 hours, depending on the tissue thickness may increase).
Acrylic putty applied to the rim of a plate, making finger invoice. Leave to dry.

Cured tissue primed with white paint

Paint the putty rim choosing paint to the background color printouts.

According to projections walked textured paint bright silver

He paints the "skirt" and painted on the background on the bottom rim. By projecting folds "skirt" also walked bright silver.

After complete drying, a plate covered with acrylic lacquer glossy.
The reverse side of a plate painted with silver paint from the spray.

Pigeon is ready.

source: liveinternet